Rambodybuilder Auxiliary Switches. Auxiliary Switch Wiring Harness Kit For 68209998AB Dodge Ram 2500 2013 The Aux switch functionality can be programmed to change how each one works • 5 Switches located in the lower switch bank of the I/P - all are auxiliary (AUX) • Switches AUX 3,4,5 are set to Ignition; AUX 1, 2 can be either Battery or Ignition (customer choice via 5A fuse location in the PDC - see the Chassis Cab Upfitter Schematic in the Chassis Cab "Upfitter Wiring Interface Instruction" chapter).
Ram Auxiliary Switch Panel with up to 4 Billet RGB Toggle Switches from mothersperformanceproducts.com
• 5 Auxiliary Switches and the PTO switch are located in the lower switch bank of the I/P • All aux switches can be programmed in the EVIC to be battery or ignition function, momentary or latching, and remember last state (for ignition operation) The auxiliary switch function logic (BATTERY or IGNITION FED, MOMENTARY or LATCHING, LAST STATE) is programmed using the EVIC display in the instrument cluster
Ram Auxiliary Switch Panel with up to 4 Billet RGB Toggle Switches
The switches have different fuse ratings on their relay side and the switches can be programmed thru the 8.4 display as to whether you want the switch to be momentary (as in push button and return) or fixed. After a lot of research I began my quest to prove them wrong. My truck did not have provisions for the auxiliary switches from the factory and the parts folks at my dealer said it was impossible to add the switches after the fact
20132018 Ram Auxiliary Switch Relay Kit DODGE RAM FORUM. 2013 Ram 2500/3500 Auxiliary Switches and 2013 Chassis Cab Upfitter The wiring harness comes standard with chassis cabs that have the aux switches but has to be ordered for the 2500/3500 trucks These switches are integrated into the vehicles electrical architecture (LIN signals) with their outputs found underhood in connectors located on the auxiliary PDC
AUX Switches Cable COLOR CODE Identification (JLUS with Photos and. FUSE RATING MAX ALLOWABLE CONTINUOUS AMPERAGE 20A 25A 40A 14A 17.5A 28A K F L A Ground Point (50A Total Max Load) GND (Frame Rail) Page : 1/16. • 6 Switches located in the lower switch bank of the I/P - all are auxiliary switches • All aux switches can be programmed in the EVIC to be battery or ignition function, momentary or latching, and remember last state (for ignition operation).